Page
48
of
100
OpEdge
Industrial Edge Gateway – Release 01.0.00 – 10/2022
3
Enter the following parameters:
Parameter
Description
Application
Name of the mapping.
Protocol
Select the protocol for packet delivery:
TCP
,
UDP
or
Both
LAN IP Address
IP address of the destination LAN device.
Note:
When configuring the end device, make sure:
The IP Address of the end device must match the value entered in the
End
Device Address
field in the OpEdge.
The Gateway address on the end device must point to the OpEdge IP
Address and Subnet Mask addresses.
From Port Range
The WAN port range through which data must be forwarded to each device.
To Port Range
The LAN device port range listening to the forwarded traffic.
Action
Deletes the mapping.
4
Click
A
DD
P
ORT
to add ports.
5
Click
A
PPLY
to save the changes.