Belden Hirschmann MACH4002 Series User Manual Download Page 23

Page: 23 / 72

Installation MACH4002

Release 16 03/2021



Power supply plug-in units for power supply basic device

M4-POWER



M4-P-AC/DC 300W

(see on page 65 “Order numbers/product description”)

Note:

The plug-in power units of the M4-POWER power supply basic

device cannot be used for the switch basic device.

1.4

Fan

Note:

Note the safety instructions in

“General safety instructions” on page 7

1.4.1

M4-AIR plug-in fan

Operate the MACH4002 switch chassis exclusively with plug-in fans as
described in the following.

On the front side of the MACH4002 basic device, the fan plug-in unit M4-AIR
is located on the left. You can replace the plug-in fan during operation.

See “Installing the M4-AIR... plug-in fan unit” on page 44.
See “Deinstalling the M4-AIR... plug-in fan unit” on page 54.



M4-AIR

: Fan plug-in unit for switch basic device MACH4002 without

temperature sensor for the use in ambient air temperatures up to
m60 °C (+140 °F).

NOTE

OVERHEATING OF THE DEVICE

Depending on the ambient temperature, the device can be operated for a
maximum of one to two minutes with the fan unit removed.

Non-adherence to these instructions can lead to material damage.

Summary of Contents for Hirschmann MACH4002 Series









































































Search results

Summary of Contents for Hirschmann MACH4002 Series

Reviews:

Related manuals for Hirschmann MACH4002 Series

Brands by name

Popular brands

Belden Hirschmann MACH4002 Series, User Manual

Search results

Summary of Contents for Hirschmann MACH4002 Series

Reviews:

Related manuals for Hirschmann MACH4002 Series

Brands by name

Popular brands