Hirschmann Automation and Control
Service :
(717) 217-2250
1540 Orchard Drive
Parts / Sales :
(717) 217-2269
Chambersburg, PA 17201
www.hirschmann-usa.com
Document: 530117 - DS85 Faceplate Replacement Page 5 of 5
14.
Insert the assembly back into the housing and screw the four Phillips screws into the back of the housing
(figure A)
.
It is very important to ensure that the wires or ribbon cables are not pinched during this process.
Do not fully tighten the screws; it will make it easier to align the screw on the front of the housing.
15.
Reinstall the four Phillips screws on the front faceplate
(figure B)
. Once installed, you can now tighten the
screws on the back of the housing.
16.
The replacement is now complete.
Note:
There is no warranty of any kind for this replacement. Any damages incurred during this process are
the responsibility of the end user (party performing the replacement). Please contact your local dealer if
additional information is required to complete this process.
