4: Network Settings
UM Configuration BAT-C2
93
Release 01.0.00 04/2019
To View or Configure Bridge Settings
Using Web Manager
To view the Bridge status, on the
Network
page, click
Bridge
>
Statistics
.
To configure Bridge settings, on the
Network
page, click
Bridge
>
Configuration
in the links.
Using XML
Include in your file:
<configgroup name=”bridge” instance=”br0”>
Wired (eth0) Network
Network interface settings apply to both the wired Ethernet (eth0) and wireless WLAN (wlan0)
interfaces, but are configured independently for each interface. The wired network pages are
described in this section.
Bridging MAC Address
Enter the bridging MAC address which specifies the MAC address of
bridgeable traffic between the Ethernet and WLAN interfaces. When bridging
is active, this MAC Address will be used as the MAC address of the WLAN
interface. Packets received on the Ethernet interface from this address will be
bridged to the WLAN interface (except traffic directed at the primary
interface). If this field is not configured, then the BAT-C2 waits for the first
packet to arrive on the Ethernet interface and uses the source address as the
bridging address.
Bridging IP Address
Enter the bridging IP address which specifies the IP address of the bridged
client. When bridging is active, this IP address will be used to create a static
route between this BAT-C2 and the bridged client. This route is required for
connecting to the bridged client from BAT-C2s connected via the access point
network and from this BAT-C2.
Auto Detect IPv4 Address
Select to enable or disable auto detection of IPv4 addresses. If enabled, the
BAT-C2 will attempt to learn the IP addresses by using the source or
destination IP address of packets arriving on the Ethernet interface. Enabled
by default.
Notice: Running processes may be impacted while the BAT-C2
monitors Ethernet traffic to determine the wired host IP address.
Bridging IPv6 Address
Enter the bridging IPv6 address.
Initial Scan Interval
Indicate time interval, in seconds, the BAT-C2 will attempt to learn the IP
address initially.
Scan Interval
Indicate how often the BAT-C2 will attempt to learn if the IP address has
changed.
Notice: Running processes may be impacted while the BAT-C2
monitors Ethernet traffic to determine the wired host IP address.
Submit (button)
Click the
Submit
button to enter the settings. The
Submit
button appears
when new settings are entered.
Bridge Fields
Description
Table 4-2 Bridge Settings (continued)
