7: Administration
UM Configuration BAT-C2
127
Release 01.0.00 04/2019
To Configure Gateway Port Forwarding Settings
Using Web Manager
To modify gateway port forwarding information, on the
Administration
page, click
Gateway >
Configuration > Port Forwarding
.
Using XML
Not applicable.
Static Routes
Allows the user to add routes to the BAT-C2 routing table.
Ingress IP Address
Enter the destination address of the packets. This option can only be used with
single ports and not with port range. Optional.
Start Port
Enter the starting port number.
End Port
Enter the end port number (optional). If start port and end port are same it
assumes a single port. If start port and end port are not the same – it is a port
range.
Protocol
Select the protocol for the rule.
TCP
,
UDP
, or
Both
.
IP Address
Enter the target for the port forwarding rule.
Target Port
Indicate the target port. This is the port which the packets are to be forwarded.
This options can only be used with single ports and not with port range. If this
value is not specified, the packets are forwarded to same port or pot range.
Optional field.
Static Route Settings
Description
Enabled
Enables the static route.
Delete
Deletes the static route.
Name
User friendly name for the route. Click on the
[Edit]
icon to make changes.
Route
Network or Host for the route.
Applied
If the route was successfully applied. Routing table updates require a
reboot and route needs to be valid as per other BAT-C2 configurables.
Table 7-9 Static Route Settings
Adding New Port
Forwarding Rule
Settings
Description
Table 7-8 Adding a New Port Forwarding Rule (continued)
