Belden HIRESCHMANN IT MAMMUTHUS MTM8003-FAN, User Manual

Page: 9 / 84

9
Installation MTS8003/8006/8010
Release 01 12/2021

Qualified personnel receive training on a regular basis.

Correct usage
Only use the device for those purposes specified in the catalog and in
the technical description. Only operate the device with external devices
and components that are recommended and permitted by the
manufacturer. The proper and safe operation of this product depends
on proper handling during transport, proper storage, assembly and
installation, and conscientious operation and maintenance procedures.

National and international safety regulations
Verify that the electrical installation meets local or nationally applicable
safety regulations.

Ensure the integrity and consistency

Check the bond on the packaging to assure it is sealed and not
tampered by unauthorized party.

Verify serial number of delivered products to make sure it is unified
with a hardcopy serial number list provided by manufacturer. If it is
necessary, please contact Belden representative to obtain a
softcopy serial number list from manufacturer for double check.

Requirements for the connecting the electrical wires
Before connecting the electric wire, make sure to always confirm
compliance with all listed requirements.

The electrical wires are voltage-free.

The cables used are permitted for the temperature range of the application case.

Connect the ground screw on the back of the device to the protective conductor before
setting up other connections. When to remove connections, the protective conductor is
the last to be removed.

Exclusively switch on the device when it is installed.

Relevant for North America:
Use 60 °C / 75 °C (140 °F / 167 °F) or 75 °C (167 °F) copper (Cu) wires only.
Table 1: Requirements for connecting electrical wires
The following requirements apply without restrictions: