Belden HIRESCHMANN IT MAMMUTHUS MTM8003-FAN, User Manual

Page: 64 / 84

64 Installation MTS8003/8006/8010
Release 01 12/2021
6.4 Removing the FAN module
Perform the following work steps:

Wear the anti-static bracelet, loosen the 2 anti-loosening screws on the
lower and upper parts of the fan module with Phillips screwdriver.

Hold the handle of the fan module with one hand and the frame of the
fan module with the other hand. Pull out the fan module smoothly along
the guide rails of the slot, and place the removed fan module on the
ESD mat or the initial packing box.
6.5 Removing the device
Perform the following work steps:

Disconnect the data cable.

Disable the suppply voltage.

Disconnect the power supply cable.

Disconnect the grounding.

To remove the device from the switch cabinet, loosen the screws on the
bracket of the device.
ELECTRIC SHOCK
Disconnect all other cables and then disconnect the ground cable.
Failure to follow this instruction can result in death, serious injury, or
device damage.
WARNING