Belden HIRESCHMANN IT MAMMUTHUS MTM8003-FAN User Manual Download

Page: 51 / 84

Installation

MTS8003/8006/8010

Release 01 12/2021

Installation

These devices are developed for use in commercial environments.

At the time of delivery, the device is ready for operation.

Perform the following work steps to install and configure the device:



Checking the package contents



Installing the power module (optional)



Installing and grounding the device



Installing the SFP transceiver (optional)



Operating the device



Connecting the data cables



Filling out the inscription label

2.1

Checking the package contents

Perform the following work steps:



Check whether the box contains all the items specified in the section

“Delivery items” on page 80.



Check the individual parts for transport damage.

2.2

Installing the power module (optional)

Note:

Hirschmann IT provides ready-to-run power modules. You can

choose to install the power module while the device is running.

Perform the following work steps:



Remove the cover plate from the power module slot of the device.



Put the power module into the power module slot of the device.

Summary of Contents for HIRESCHMANN IT MAMMUTHUS MTM8003-FAN





















































































Search results

Summary of Contents for HIRESCHMANN IT MAMMUTHUS MTM8003-FAN

Reviews:

Related manuals for HIRESCHMANN IT MAMMUTHUS MTM8003-FAN

Brands by name

Popular brands

Belden HIRESCHMANN IT MAMMUTHUS MTM8003-FAN, User Manual

Search results

Summary of Contents for HIRESCHMANN IT MAMMUTHUS MTM8003-FAN

Reviews:

Related manuals for HIRESCHMANN IT MAMMUTHUS MTM8003-FAN

Brands by name

Popular brands