Belden Grass Valley XCU Universe XF, User Manual, Page: 56 / 66

56 XCU Universe XF XF Transmission Base Station User’s Guide (v1.4)
Chapter 6 - Connectors and signals
6.1.7 External video connectors
*) This output signal is only looped-through when the XCU is mounted in its cradle.
☞
Note
☞
Note
Make sure that the applied external video inputs match the temporal frequency (50/59.94 Hz)
of the selected camera video mode and that they are synced with the camera output signal.
6.1.8 Teleprompter and Reference connectors
Area 1: Teleprompter connectors
*) This output signal is always looped-through even when the XCU is not mounted in its cradle.
Connector Signal
Ext 1-in External 1 HD-SDI or SDI video input
Ext 2-in External 2 HD-SDI or SDI video input
Ext 1-out External 1 HD-SDI or SDI loop-through signal *)
Ext 3-in External 3 HD-SDI or SDI video input
Ref in TP in
Monitoring
HD Video out
--A--
--B--
--C--
Live-Effect
--D--
--SDI Out--
Ext 2 in
Ext 3 in Ext 1 out
Ext 1 in
HD-SDI
SDI
CVBS
Ref out
TP out
D
i
i
Connector Signal
TP in Teleprompter input signal (analog SD)
TP out Teleprompter loop-through output signal *)
Ref in TP in
Monitoring
HD Video out
--A--
--B--
--C--
Live-Effect
--D--
Ext 2 in
Ext 3 in Ext 1 out
Ext 1 in
HD-SDI
SDI
CVBS
Ref out
TP out
--SDI Out--