Belden Grass Valley Kayenne K-Frame, Installation & Service Manual

Page: 199 / 288

KAYENNE K-FRAME — Installation & Service Manual 199
Mapping Logical Remote Aux Panels
Frame Suite Nodes & ID Menu
Figure 134. Frame Suite Nodes & ID Menu
The Frame Suite Nodes & ID menu has fields to enter the IP addresses the
GV Switcher menu application will use to communicate with the Video
Processor Frame, Image Store, and the Control Panel whose DPOPs will
affect this application’s menu displays. A menu restart is required to make
IP address changes take effect.
When connected, the currently defined names of these devices are dis-
played. These names can be edited from this menu, and will be sent to the
device as soon as the new name has been entered. Subsequent connections
to this device from this or another menu will show that edited name.
Note Do not change device or suite names unnecessarily, as this could cause con-
fusion to other Kayenne K-Frame system users.
Mapping Logical Remote Aux Panels
The Remote Aux Logical Map menu ( Figure ) is used to assign Aux Buses
for control by that Remote Aux Panel. Single Aux Panels can control one
Aux Bus, while Multi-Delegation panels can have several Aux Buses be
assigned to delegation buttons on that panel.