25
Kaleido-MX (1RU)
Installation & Service Manual
• Cables (to connect your multiviewer to video sources, to displays, and to the network):
Optional Ancillary Equipment
The following optional equipment may be supplied with your order.
• Kaleido RCP-2 or RCP-200 multi-function remote control panel
• Audio Bridge Terminal (ABT)
Cable type
Purpose
CAT-5
For Ethernet connectivity
Display cables
To connect the multiviewer’s HDMI outputs to displays:
• Standard HDMI cables
• Extension modules—for example, Grass Valley’s DXF-200 DVI/HDMI
Optical Extension System:
• part number DXF-200-C for the Kaleido-MX (1RU)
16
×
4
model only
• part number DXF-200-B, for all other Kaleido-MX models
To connect the multiviewer’s SDI outputs to displays:
• Standard coaxial cables with DIN 1.0/2.3 connectors
• SDI to HDMI 2.0 (or SDI to DisplayPort) converter—for example, AJA’s
Hi5-4K Mini-Converter (firmware version 2.2 or later)
Video cables
Standard coaxial cables with DIN 1.0/2.3 connectors
Notes
• On all Kaleido multiviewers, the network adapters are set to auto-
negotiate. By default, the connection speed and duplex mode will be set
automatically based on the corresponding port settings on the switch.
• The Kaleido-MX (1RU)
16
×
4
model supports
non-locking
HDMI cables
only. Make sure the HDMI connectors on the multiviewer side have the
same dimensions. Otherwise, the built-in locking mechanism may not be
able to secure the smaller connectors. You may order suitable HDMI cables
from Grass Valley—HDMI to DVI female cable (1ft), part no. KXC-HDMI-DVI.
Summary of Contents for GRASS VALLEY KALEIDO-MX 1RU
Page 12: ...12 Notices...
Page 22: ...22 Overview Functional Block Diagrams...
Page 154: ...154 Maintenance Troubleshooting Dashboard Messages...
