118
System Configuration
Configuring an Audio Bridge Terminal
Configuring an Audio Bridge Terminal
The optional Audio Bridge Terminal (ABT) is an external audio multiplexer/serializer for the
Kaleido-MX. The Kaleido-MX supports audio channel inputs from the ABT-64 or ABT-128
series of Audio Bridge Terminal panels through SDTI inputs. The ABT-64 supports
64 channels and the ABT-128 supports 128 channels.
The Audio Bridge Terminal (ABT) is an external audio multiplexer/serializer for Kaleido
multiviewers. The ABT provides connector space for audio signal inputs, and multiplexes all
the audio signals into combined serial feeds on coaxial cables that connect to the
multiviewer’s input modules.
For more information, refer to the
Audio Bridge Terminal Guide to Installation and Operation
;
To configure the IP address and other network settings of the ABT
1 Connect a PC to a switch.
2 Referring to
Configuring a PC to Configure an ABT’s Network Settings
configure the PC with the following network settings:
3 Apply power to the Audio Bridge Terminal and make sure it is connected to the same
switch as the PC.
• If the switch is Power over Ethernet (PoE) enabled, simply connect it to the unit
using an Ethernet cable.
Note:
The ABT is powered through the RJ-45 Ethernet connector. There is
no power ON/OFF button, so the device is ON whenever a powered Ethernet
cable (PoE) is connected.
Property
Setting
DHCP
Off
Static IP address
10.0.0.1
Subnet mask
255.255.0.0
Default gateway
10.0.0.1
Summary of Contents for GRASS VALLEY KALEIDO-MX 1RU
Page 12: ...12 Notices...
Page 22: ...22 Overview Functional Block Diagrams...
Page 154: ...154 Maintenance Troubleshooting Dashboard Messages...
