[3]
Figure 1-3a, Possible LEDs in positions “A” and “B” shown in Figure 1-3 above.
The LEDs shown in Figure 1-3(a) are as follows:
E1, E2 - Gigabit Ethernet ports
C1 - Cellular Interface
W1 - WAN Port
S1 through S4 - Four Serial ports labeled S1, S2, S3 and S4
1.2.4 Moun ng Op ons
There are three mounting options for the DX940e:
19” rack mount (see
Mounting in a 19" Rack System
)
Panel mount (see
Mounting on a Panel
)
DIN-Rail mount (see
Mounting in a DIN-Rail System
)
Each of these options requires specific accessory hardware. Each type of accessory hardware mates up with a specific
set of screw holes on the sides of the chassis, illustrated in Figure 1-4.
Figure 1-4, Side view
FR
O
N
T
for 19” rack moun ng hardware
for DIN rail / panel moun ng hardware
