Belco Tar River BDR-135, Operator'S Manual

Page: 22 / 53

22
Assembly of the Mower
The manufacturer delivers a mower with the cutting system’s cover that is not assembled.
The responsibility to install the covers is on the side of the purchaser.
Operating the mower with the cutting system’s cover not installed or damaged or with the shield lifted is hazardous
to the operators and the environment.
The cover should be installed in the following way:
• Unscrew the bolts M10x25 (Position 1 of the drawing below).
• Screw in the brackets with the rest of the covers of the upper frame (Position 2 of the drawing below).
Dismantling, Utilization, and the Methods of Utilization.
Protect your hands (body) from injuries and harmful effects of lubricants and oils. Use protective gloves
and tools in good technical condition. The parts of the machine which may reposition or turn during the
disassembling should be appropriately secured.
The worn out or damaged parts obtained during repairs (dismantling) should be stored in a separate place of limited
access to people and animals. The worn parts should be taken to the recycle center. The worn items made of plastic
material should be taken to a place for the disposal of chemicals.
Do not spill oil during the time of refilling or changing it. The used oil should be stored in tight containers and
periodically deliver it to the oil disposal centers.
1
2