background image

BelAir100SN Installation Guide

Conformity and Regulatory Statements

May 18, 2010

Confidential

Page 69 of 75

Document Number BDTK11001-A01 Preliminary

Eliminação do produto

A BelAir Networks cumpre a Directiva 2002/96/CE do Parlamento Europeu e 
do Conselho, de 27 de Janeiro de 2003, relativa aos Resíduos de Equipamentos 
Eléctricos e Electrónicos (REEE).

Para proceder à eliminação do equipamento, incluindo as baterias, é favor 
contactar a assistência ao cliente da BelAir Networks para obter um número 
de Autorização de Devolução do Material (RMA – Return Material 
Authorization) e as instruções relativas ao envio. A assistência ao cliente da 
BelAir Networks pode ser contactada através de:

• 613-254-7070, item de menu 3

• 1-877-BelAir1 (235-2471), item de menu 3

• [email protected]

Eliminación del 

producto

BelAir Networks cumple con la directiva 2002/96/EC del Parlamento Europeo y 
del Consejo de 27 de enero de 2003 sobre los residuos de aparatos eléctricos 
y electrónicos (RAEE).

Para la eliminación de equipo, incluyendo las pilas, contacte con el servicio de 
atención al cliente de BelAir Networks y obtenga el número de una 
Autorización de Devolución de Material (RMA) y las instrucciones para la 
expedición. Utilice la siguiente información para comunicarse con el servicio de 
atención al cliente de BelAir Networks:

• 613-254-7070, número 3 del menú

• 1-877-BelAir1 (235-2471), número 3 del menú

• [email protected] 

Summary of Contents for 100S












































































Reviews: