manualshive.com logo in svg

bel Digital Audio BMA2-4SHD, User Manual, Page: 23 / 37

Share
Download
bel Digital Audio BMA2-4SHD User Manual Download Page 23

BEL DIGITAL AUDIO 

BMA2-4SHD  

Using MonitorMx software 

 2006 BEL (Digital Audio) Ltd 

19 

 Version 0.8 

Configuring alarms 

To enable alarms on a selected unit check the alarm categories at the left of the main 
screen. Toggle inverts the selection. If an alarm is generated the associated virtual LED will 
change from green to red and will flash if the Flashing box has been checked. If PC Sounder 
has been checked an audio alert will also be sent to a sound card and any connected 
speakers if fitted.  

System alarms 

The Systems Alarms command under the View menu will bring up the systems alarms 
window.  

 

The MonitorMX system alarms 

 

System alarms are alarms generated by any connected unit. Controls are provided to reset 
alarms from all units and to enable visual alarm flashing and audible alerts for alarms 
generated from any connected units. 

Resetting alarms 

Alarms are not automatically cancelled when a monitored signal is restored to normal. To 
cancel alarms click on a Reset button for an individual unit or for all units using the Reset 
button in the Systems Alarms window. 

Muting alarms 

An audio alert in the form of a 

.wav

 file can be sent to any sound card and connected 

speakers. Mute the alarm by un-checking the PC Sounder box for an individual unit or for all 
units using the Systems Alarms window. 

Notes: 

Un-checking the PC Sounder box does not affect audible alarms on any unit(s). 
The selective SET function of the front control panel is not required, since any alarm may 
be selected individually. 

 

Summary of Contents for BMA2-4SHD






































Reviews:

No comments