Bel-art B60901-0100, Manual

Page: 7 / 11

RTD THERMOMETER
6
6. SETTING THE TIME
6.1
To enter into the meter setup mode, press and hold the
button, then power on the meter.
6.2
Press the button to enter “Time setting” mode. The right two digits will blink.
6.3
Press either the
▲
or
▼
button until the display shows the correct year , then press the
button to select. The left two digits will blink.
6.4
Press either the
▲
or
▼
button until the display shows the correct month , then press the
button to select. The right two digits will blink.
6.5
Press the
▲
or
▼
button until the display shows the correct day , then press the
button to select. The left two digits will blink.
6.6
Press the
▲
or
▼
button until the display shows the correct hour (24-hour format), then
press the button to select. The right two digits will blink.
6.7
Press the
▲
or
▼
button until the display shows the correct minutes , then press the
button to store the time in memory.
Note: Holding down either the
▲ or ▼ button will cause the number to change more quickly.
7. CLEARING MEMORY
When the memory is full, “ MEM” will appear and blink on the display and logging stops.
To enter into the “Clear memory” mode, press and hold the button, then power on the meter.
The display shows the number from 5 decreasing to 0.