RTD THERMOMETER
4
Press the
button again, the
MAX
and
MIN
symbols will blink together. All the data is updated
in the memory and the reading is the present temperature.
The user may press the
button to circulate the display mode among these options.
To exit the MAX/MIN mode, press and hold the
button for two seconds
.
NOTE: When the meter is in the MAXMIN operation, the
and
buttons
are disabled.
4.9 Auto Power-Off:
By default, when the meter is powered on, it is in auto power-off mode. The meter will power itself
off after 30 minutes if no button is pushed.
To disable the auto power-off, press and hold the
button and then power on the meter. There
will be two successive beeps to confirm that auto power-off is disabled.
4.10 Low Battery Condition:
The temperature meter low battery indication is:
Low battery. Replace the batteries.
5. TEMPERATURE MEASUREMENT
5.1 Correct Measurement Method:
T
HE TEMPERATURE SENSOR IS LOCATED AT THE END OF
THE METAL SHEATH OF THE
TEMPERATURE
PROBE.
T
O ACCURATELY TEST INTERNAL TEMPERATURE
,
INSERT
THE PROBE INTO THE SPECIMEN TO A DISTANCE AT LEAST
15
TIMES THE DIAMETER OF THE SHEATH
.
5.2 Connector Configuration:
Summary of Contents for B60901-0100
Page 6: ...RTD THERMOMETER 5 ...
