93 / EN
Washing Machine / User’s Manual
Problem
Cause
Solution
Detergent residue in the
detergent drawer. (**)
Detergent was put in wet drawer.
•
Dry the detergent drawer before
putting in detergent.
Detergent has gotten damp.
•
Keep detergents closed in an
environment free of humidity and
do not expose them to excessive
temperatures.
Water pressure is low.
•
Check the water pressure.
The detergent in the main wash compartment got
wet while taking in the prewash water. Holes of
the detergent compartment are blocked.
•
Check the holes and clean if they are
clogged.
There is a problem with the detergent drawer
valves.
•
Call the Authorised Service Agent.
Detergent was mixed with the softener.
•
Do not mix the softener with
detergent. Wash and clean the drawer
with hot water.
Regular drum cleaning is not applied.
•
Clean the drum regularly. For this
procedure, please see "4.4.2 Cleaning
the loading door and the drum".
Too much foam forms inside
the product. (**)
Improper detergents for the washing machine
is used.
•
Use detergents appropriate for the
washing machine.
Excessive amount of detergent is used.
•
Use only sufficient amount of
detergent.
Detergent was stored under improper conditions.
•
Store detergent in a closed and dry
location. Do not store in excessively
hot places.
Some meshed laundry such as tulle may foam too
much because of their texture.
•
Use smaller amounts of detergent for
this type of item.
Detergent was put in the wrong compartment.
•
Put the detergent in the correct
compartment.
Softener is being taken early by the product.
•
There may be problem in the valves
or in the detergent drawer. Call the
Authorised Service Agent.
Foam is overflowing from
the detergent drawer.
Too much detergent is used.
•
Mix 1 tablespoonful softener and
½ l water and pour into the main
wash compartment of the detergent
drawer.
•
Put detergent into the product
suitable for the programmes and
maximum loads indicated in the
“Programme and consumption
table”. When you use additional
chemicals (stain removers,
bleaches and etc), reduce the
amount of detergent.
When the Wash&Wear
function is selected, the
laundry is still damp at the
end of the programme.
Excessive laundry is loaded in.
•
Load a maximum of 1 kg when the
Wash&Wear function is selected.
Function is not active.
•
After the selected washing
programme, check if the
Wash&Wear function has been
selected or not.