EN
19
Time display
The display shows the time remaining for
the program to complete while a program
is running. Time is displayed in hours and
minutes as “01:30”.
Time delay
With the “Time delay” function you can
delay the program startup up to 19 hours.
Time delay can be increased in one-hour
increments.
C
Do not use liquid detergent when you
set time delay! There is the risk of
staining of the clothes.
1. Open the loading door, place the
laundry inside and fill detergent
drawer.
2. Select the washing program,
temperature, spin speed and, if
required, the auxiliary functions.
3. Pres “Time Delay” button to adjust the
desired time.
4. Press "Start/Pause" button. The time
delay will start to count down. The
set time delay is displayed. The "_"
symbol displayed near the time delay
starts flickering up and down.
C
Additional laundry may be loaded
during the time delay period.
5. The selected program duration is
displayed at the end of the countdown
process. "_" symbol disappears and
the selected program starts.
Changing the delay time
If you want to change the time during the
countdown:
1. Press the time delay button. Every
time the button is pressed, the time
will be increased in 1-hour increments.
2. If you wish to shorten the time delay,
keep on pressing the time delay
button until the time delay you would
like to set appears on the screen.
Canceling the time delay
If you want to cancel the time delay
countdown and start the program:
1. Set the Time Delay to zero or turn
the Program selection knob to any
program. Thus, the time delay will be
cancelled. The “
” (End/Cancel)
light flashes continuously. Then, select
the program you wish to run again.
2. Press "Start/Pause" button to start the
program.
Starting the Program
1. Press "Start/Pause" button to start the
program.
2. Program follow-up lamp showing the
startup of the program will light up.
C
If no program is started or no key
is pressed within 1 minute during
program selection process, the
machine will switch to "Stand-by"
mode and the illumination level of
the temperature, speed and door
indicators will decrease. Other lights
and indicators will turn off. In case of
turning the program selection knob
or pressing any button, lights and
indicators will turn on.
Progress of program
Progress of a running program is shown
through the program follow-up indicator.
At the beginning of every program step,
the relevant indicator LED will light up and
light of the completed step will turn off.
You can change the auxiliary functions,
speed and temperature settings without
stopping the program flow while the
program is running. However, the change
to be made must be compatible with the
program step the machine is currently in.
If the change is not compatible, relevant
lights will flash for 3 times.
C
If the machine is not spinning, the
program may be in rinse hold mode
or the automatic spin correction
system has been activated due to an
excessive unbalanced distribution of
laundry in the machine.
