52
EN
Adding/removing laundry in pause
mode
If the "Door" light flashes while the
machine is in pause mode, it means
that the conditions (low water level, etc.)
to open the door have been met and
the period of approx. 1 or 2 minutes
to open the door has started. “Door”
lamp will light up continuously when the
door is unlocked. Door can be opened
to load or unload the laundry after this
moment. If the front door cannot be
opened because of a safety reason after
the machine has been switched to the
pause mode by pressing the "Start/
Pause" button, the "Door" light will
continue to remain off. Nevertheless, the
follow-up light of the relevant program
in which the machine was taken to
"Pause" mode will flash.
Door lock
The loading door can be opened once
the “Door” lamp stops flashing and
starts lighting up continuously.
Child-proof lock
Protect the appliance from being
tampered by children by means of the
child-proof lock. In this case, no change
can be made in the running program.
C
If the program selection knob is turned
when the child-proof lock is activated,
"Con" label will be displayed. In this
case, any change in temperature,
speed and auxiliary functions which are
already selected for the programs is not
allowed.
C
If the program selection knob is turned
to "On/Off" position and then another
program is selected while a program is
running, the previously running program
will resume operating.
The machine is switched to child-lock
by pressing the 1st and 2nd auxiliary
functions for 3 sec. While the lights on
the auxiliary function buttons 1 and 2 are
flashing during 3-second press and hold
process, C03, C02 and C01 labels will
be displayed respectively. Then the label
"Con" will be displayed to show that the
child-proof lock is activated. The same
label will also appear on the screen
when any button is pressed or when the
program selection knob is turned while
the machine is in child-proof lock mode.
Furthermore, the lights on the auxiliary
function buttons 1 and 2 blink 3 times
to show how to exit Child-proof Lock
mode.
To deactivate the childproof lock:
a) Press the auxiliary function buttons 1
and 2 for 3 sec. while any program is
running. While the lights on the auxiliary
function buttons 1 and 2 are flashing
during 3-second press and hold
process, C03, C02 and C01 labels will
be displayed respectively. Then, the
"COF" label will be displayed to show
that the child-proof lock mode has
been deactivated.
b) In addition to the above method, child-
proof lock can also be deactivated by
turning the program selection knob to
"On/Off" position and selecting another
program when no program is running.
Child-proof lock will not be deactivated
in case of power failures or when the
machine is unplugged. To deactivate
the child-proof lock, press the 1st and
2nd auxiliary function buttons for 3 sec.
Ending the program through
canceling
When another program is selected
instead of a running program by
turning the program selection knob, the
previous program is cancelled. The “
” (End/Cancel) light flashes continuously
to indicate that the program is
cancelled. If conditions to open the door
are met during cancellation (if water level
is suitable, etc.), the "Door" light will
flash for about 1-2 minutes. When the
"Door" light becomes solid after 1 or 2
minutes, it means that the door can now
be opened.
“Stand-By” mode
“Stand-By” mode will allow to save
energy while your machine is not
running. Unnecessary lights and
indicators will be turned off in this
mode. Thus, maximum energy saving is
provided.
