Beko WDJ7523023W User Manual Download Page 66

Page: 66 / 72

66 / EN

Washer-Dryer

Troubleshooting

• Laundry is unbalanced in the machine. >>>

Automatic unbalanced load detection

system might be activated due to the unbalanced distribution of the laundry in the drum.

• The machine will not spin if water is not drained completely. >>>

Check the filter

and the draining hose.

• Excessive foam has occurred and automatic foam absorption system has been

activated due to too much detergent usage. >>>

Use recommended amount of

detergent.

Washing performance is poor: Laundry turns grey. (**)

• Insufficient amount of detergent has been used over a long period of time. >>>

Use the recommended amount of detergent appropriate for water hardness and the

laundry.

• Washing has been performed at low temperatures for a long time. >>>

Select the

proper temperature for the laundry to be washed.

• Insufficient amount of detergent is used with hard water. >>>

Using insufficient

amount of detergent with hard water causes the soil to accumulate on the clothes over

time and turns them grey. It is difficult to eliminate greying once it happens. Use the

recommended amount of detergent appropriate for water hardness and the laundry.

• Excessive amount of detergent has been used. >>>

Use the recommended amount

of detergent appropriate for water hardness and the laundry.

Washing performance is poor: Stains persist or the laundry is not whitened. (**)

• Insufficient amount of detergent is used. >>>

Use recommended amount of

detergent appropriate for the laundry.

• Excessive laundry is loaded in. >>>

Do not load the machine in excess. Load with

amounts recommended in the "Programme and consumption table".

• Wrong programme and temperature were selected. >>>

Select the proper

programme and temperature for the laundry to be washed.

• Wrong type of detergent is used. >>>

Use original detergent appropriate for the

machine.

• Detergent is put in the wrong compartment. >>>

Put the detergent in the correct

compartment. Do not mix the bleaching agent and the detergent with each other.

Washing performance is poor: Oily stains appeared on the laundry. (**)

• Regular drum cleaning is not applied. >>>

Clean the drum regularly. For this, please

see 6.2.

Washing performance is poor: Clothes smell unpleasantly. (**)

• Odours and bacteria layers are formed on the drum as a result of continuous

washing at lower temperatures and/or in short programmes. >>>

Leave the

detergent drawer as well as the loading door of the machine ajar after each washing.

Thus, a humid environment favorable for bacteria cannot occur in the machine.

Colour of the clothes faded. (**)

• Excessive laundry was loaded in. >>>

Do not load the machine in excess.

• Detergent in use is damp. >>>

Keep detergents closed in an environment free of

humidity and do not expose them to excessive temperatures.

• A higher temperature is selected. >>>

Select the proper programme and temperature

according to the type and soiling level of the laundry.

Washing machine does not rinse well.

Summary of Contents for WDJ7523023W









































































Search results

Summary of Contents for WDJ7523023W

Reviews:

Related manuals for WDJ7523023W

Brands by name

Popular brands

Beko WDJ7523023W, User Manual

Search results

Summary of Contents for WDJ7523023W

Reviews:

Related manuals for WDJ7523023W

Brands by name

Popular brands