64 / EN
Washer-Dryer
7
Troubleshooting
Programmes do not start after the loading door is closed.
Start / Pause / Cancel button is not pressed.>>>
*Press Start/Pause/Cancel button.
Programme cannot be started or selected.
• Washing machine has switched to self protection mode due to a supply problem
(line voltage, water pressure, etc. >>>
Press and hold On/Off button for 3 seconds to
reset the machine to factory settings. (See. “Cancelling the programme”)
Water in the machine.
• Some water may remain in the product due to the quality control processes in the
production. >>>
This is not a failure; water is not harmful to the machine.
There is water leaking from the bottom of the machine.
• There is a problem with hoses or the pump filter. >>>
Be sure the seals of the water
inlet hoses are securely fitted. Attach the hose to the tap tightly.
• Pump filter is not closed securely. >>>
Make sure that the pump filter is closed
securely.
Machine does not fill with water.
• Tap is turned off. >>>
Turn on the taps.
• Water inlet hose is bent. >>>
Flatten the hose.
• Water inlet filter is clogged. >>>
Clean the filter.
• Loading door is not closed. >>>
Close the loading door.
Machine does not drain water.
• Water drain hose is clogged or twisted. >>>
Clean or flatten the hose.
• Pump filter is clogged. >>>
Clean the pump filter.
Machine vibrates or makes noise.
• Machine is standing unbalanced. >>>
Adjust the feet to level the machine.
• A hard substance has entered into the pump filter. >>>
Clean the pump filter.
• Transit bolts are not removed. >>>
Remove the transit bolts.
• Laundry quantity in the machine is too little. >>>
Add more laundry to the machine.
• Machine is overloaded with laundry. >>>
Take out some of the laundry from the
machine or distribute the load by hand to balance it.
• Machine is in contact with a rigid surface. >>>
Make sure that the machine is not
contacting anything.
Machine stopped shortly after the programme started.
• Machine has stopped temporarily due to low voltage. >>>
It will resume running
when the voltage restores to the normal level.
Machine directly discharges the water it takes in.