If you wish to return to the previous
program that you were watching then
you have the ability to return with a
single function, by pressing the ( )
button. Regardless of whether you are
in AV, or any other program, by using
the SWAP function allows you to swap
between the program you were
watching and the last selected program. If you
hit the same button again, you will return to the
program or AV you were watching before.
When you press the red ( ) stand-by
button (temporary on-off function) located
on the upper right hand side of your
remote control of your television when
it is switched on;
indicator of your television will light red.
To switch your television back on, either
press the same button, any of the number
buttons or one of the (
)/(
)
buttons.
Using the TV
Turning on for the first time and Tuning
TV controls
To temporarily mute the sound of your
television, press the ( ) button, where
the ( ) on screen display will appear
on screen as an indication of the
application.
When you press the same button again, the
sound will return. During mute, when you press
the ( ) button the volume will decrease and
automatically get out of the mute function, if you
press the ( ) button the volume will increase
and automatically get out of the mute function.
Temporary On-Off (STAND-BY)
PR 01
PR 11
PR 01
Return to Selected Button
Program (SWAP)
Mute
There are certain settings which you must make
when setting up the television.
When you first switch it on, the Language menu
appears.
1.
Select the menu language by pressing
( )
or
( )
.
2.
Select Country with (
) or (
) and then select
the country where you are located with
( )
or
( )
.
3.
Select Station search with (
) or (
) and press
(
) to start the search.
• The automatic station search starts. This may last
a minute or longer, depending on the number
of television stations received.
• After the search, the station list appears.
You can delete any stations which have been
saved more than once. You can also move stations
to a different preset position, and change or
enter the station names.
Programme selection
Press the (
)/(
)
buttons on your
remote control, or by selecting a numeric
button in order to get the desired channel
on your television. In order to select a
program whose number is greater than
9, you can use the numeric buttons,
punching in the desired numbers as
required. For example, to select program
12, press the numeric buttons 1 and 2
one after another.
Caution!
If you are not going to use your television
for a long period of time, make sure to
switch it off from the main power button.
Summary of Contents for P7
