EN
12
4
Before operating
Final Check
Before you start using the fridge/
freezer check that:
1.
For a freestanding appliance;
this refrigerating appliance is not
intended to be used as a built-in
appliance.
2.
The feet have been adjusted
for perfect levelling.
3.
The interior is dry and air can
circulate freely.
4.
Clean the interior as
recommended under “Cleaning And
Care.”
5.
Insert the plug into the wall
socket and switch on the electricity
supply. When the door is open the
interior light will come on.
6.
You will hear a noise as the
compressor starts up. The liquid and
gases sealed within the refrigeration
system may also give rise to noise,
whether the compressor is running or
not which is quite normal.
7.
Slight undulation of the top of
the cabinet is quite normal due to the
manufacturing process used, so do
not worry, it is not a defect.
8.
We recommend that you
set the thermostat at 3 (three)
and monitor the temperature to
ensure the appliance maintains
desired storage temperatures (See
section Temperature Control and
Adjustment).
9.
Do not load the appliance
immediately it is switched on. Wait
until the correct storage temperature
has been reached. We recommend
that you check the temperature
with an accurate thermometer
(see; Temperature Control and
Adjustment).
Important Note :Ice formation at
the back is normal, do not worry.
(See Defrosting)