Beko HTZG 64120 Manual Download Page 4

 

4/EN 

1

 Important instructions and warnings for safety and 

environment 

 

This section contains safety 
instructions that will help protect from 
risk of personal injury or property 
damage. Failure to follow these 
instructions shall void any warranty.  

General safety 

 

This appliance can be used by 
children aged from 8 years and 
above and persons with reduced 
physical, sensory or mental 
capabilities or lack of experience 
and knowledge if they have been 
given supervision or instruction 
concerning use of the appliance 
in a safe way and understand the 
hazards involved. 
Children shall not play with the 
appliance. Cleaning and user 
maintenance shall not be made 
by children without supervision. 

 

Never place the product on a 
carpet-covered floor. Otherwise, 
lack of airflow beneath the 
product will cause electrical parts 
to overheat. This will cause 
problems with your product. 

 

Installation and repair procedures 
must always be performed by 
Authorized Service Agents. The 
manufacturer shall not be held 
responsible for damages arising 
from procedures carried out by 
unauthorized persons which may 

also void the warranty. Before 
installation, read the instructions 
carefully. 

 

Do not operate the product if it is 
defective or has any visible 
damage. 

 

Control that the product function 
knobs are switched off after every 
use. 

Safety when working with gas 

 

Any works on gas equipment and 
systems may only be carried out 
by authorised qualified persons 
who are Gas Safe registered. 

 

Prior to the installation, ensure 
that the local distribution 
conditions (nature of the gas and 
gas pressure) and the adjustment 
of the appliance are compatible. 

 

This appliance is not connected to 
a combustion products or 
evacuation device. It shall be 
installed and connected in 
accordance with current 
installation regulations. Particular 
attention shall be given to the 
relevant requirements regarding 
ventilation; See 

Before installation, 

page 10

  

 

The use of gas cooking appliance 
results in the production of heat 
and moisture in the room in which 
it is installed. Ensure that the 

Summary of Contents for HTZG 64120


















Reviews: