Beko HTV8733XW0 User Manual Download

Page: 60 / 68

60 / EN

Washer-Dryer / User’s Manual

Maintenance and cleaning

INFORMATION

• Repeat Drum Cleaning process in every 2 months.

• Use an detergent /anti-limescale suitable for the washing

machines.

After every washing and drying make sure that no foreign substance is left in the

drum.
If the holes on the bellow shown in the figure are blocked, open the holes using a

toothpick.

INFORMATION

• Foreign metal substances will cause rust stains in the

drum. Clean the stains on the drum surface by using

cleaning agents for stainless steel. Never use steel wool

or wire wool.

CAUTION

• Never use sponge or scrub materials. These will

damage the painted, chrome and plastic surfaces.

6.3 Cleaning the body and control panel

Wipe the body of the machine with soapy water or non-corrosive mild gel detergents

as necessary, and dry with a soft cloth.
Use only a soft and damp cloth to clean the control panel.

6.4 Cleaning the water intake filters

Summary of Contents for HTV8733XW0





































































Search results

Summary of Contents for HTV8733XW0

Reviews:

Related manuals for HTV8733XW0

Brands by name

Popular brands

Beko HTV8733XW0, User Manual

Search results

Summary of Contents for HTV8733XW0

Reviews:

Related manuals for HTV8733XW0

Brands by name

Popular brands