10 / EN
Cooker Hood / User Manual
3
Operation of the Appliance
3.5 Operation with Flue
Connection
•
Vapour is extracted
through the flue duct, which
is fastened to the connec-
tion head on the hood.
•
The diameter of the flue duct must be the
same as the connection ring. In horizontal
settings, the pipe has to have a slight up-
ward slope (around 10º) so that the air can
exit the room easily.
3.6 Operation
without Flue
Connection
•
Air is filtered through the carbon filter and
recirculated in the room. Carbon filter is
used when it is impossible to use a flue in
the house.
•
In flueless use, remove the flaps inside the
flue adapter.
•
Remove the Grease Filter . To install the
carbon filter, fit the filter to the tabs by cen-
tring it on the plastic piece on both sides of
the fan body. tighten it by turning right or
left.
•
Replace aluminium Grease Filter .
Bulb
Bulb Power (W)
3
Holder / Socket
E 14
Bulb Voltage (V)
220 - 240
Size (mm)
35 x 100
ILCOS Code
DRBB/F-3-220-
240-E14-35/100
A
CAUTION
Disconnect the electrical supply of
the hood. Leave the lamps to cool
down first because they could burn
your hands when they are hot.
•
Remove the aluminium cartridge filter. Re-
move the defective bulb and replace with
a new one with the same rating (Figure 4).
3.4 Replacement of Lamp
(Figure 4)
MAX
3 W
