22 / EN
Built-in hob / User manual
7
Maintenance and care
4. Clean the spark plugs and thermal elements (in models with
ignition and thermal element) with a well squeezed cloth. Then
dry with a clean cloth. Pay attention that the spark plug and the
thermal element are completely dry.
5. Clean the burner caps and heads with detergent water after
each operation and then dry them.
6. For persistent stains, keep burner caps and heads in deter-
gent water or warm soapy water at least for 15 minutes. Clean
with a non-metallic and non-scratching brush.
7. You may use the Quick&Shine cleaning agents for the oven
interiors and grills, used on enamelled sur-faces and recom-
mended by the authorized service, especially for persistent
stains on enamelled burner caps.
8. Do not contact burner caps with aggressive deter-gents such
as oven interior cleaning agents, desca-lers while cleaning
them, this may cause discolou-ration.
9. Clean the pot holders with detergent water and non-scratch-
ing, soft brush after each operation and then dry them.
10. When the burner caps and pot holders are used as wet,
persistent lime stains may occur as a result of the heat. Ensure
that it is dried before operation.
11. Place burner heads, caps and pot holders respec-tively.
12. When placing the pot holders, ensure that they centre the
burners.
Assembling the burner parts
Place the parts as in the figure after cleaning the burners.
