PNEUMATIG.EU - GDYNIA UL.WIELKOPOLSKA 158 -
58 622 49 22
Safety instructions
DRYPOINT® RA 3-160
9
In this case, please proceed as follows:
Switch off the refrigeration plant.
Switch off the mechanical ventilation of the machinery compartment.
Use ambient-air-independent respirators.
Containers and plants which are filled with refrigerant can burst violently in the event of fire.
The refrigerants themselves are incombustible, but they are degraded to very toxic products at high tem-
peratures.
Remove the container/plant from the fire zone, as there is the risk of bursting!
Cool down containers and bottles via a directed water jet from a safe position.
In the event of fire, please use an approved fire extinguisher. Water is not a suitable agent to extinguish
an electrical fire.
This must only be carried out by persons who are trained and informed about the hazards emanating
from the product.
Caution!
Unauthorised intervention!
Unauthorised interventions may endanger persons and plants and lead to malfunction.
Unauthorised interventions, modification and abuse of the pressure devices are prohibited.
The removal of sealings and leadings at safety devices is prohibited.
Operators of the devices must observe the local and national pressure equipment regulations in the
country of installation.
Pos : 8 /Beko Tec hnisc he Dokumentati on/Sic herheit/Sicher heits hi nweis e, weitere BM (nic ht Ex) @ 0\mod_1183616103770_6.doc @ 4009os : 9 /Beko Tec hnisc he D okumentati on/Sic herheit/Z us atz Sic her hei tshi nweise BM 33 @ 0\mod_1231926887620_6.doc @ 12829s: 10 /Beko Tec hnis che D okumentati on/Sic her heit/Vorsic ht Fehlfunktion @ 0\mod_1214378096290_6.doc @ 9359
Note!
Ambient conditions!
In the event that the dryer is not installed under suitable ambient conditions, the ability of the device to
condense refrigerant gas is impaired. This can result in a higher load of the refrigerating compressor, and
in a loss of efficiency and performance of the dryer.
This in turn leads to overheated condenser fan motors, to malfunction of electric components and to a
breakdown of the dryer.
Do not install the dryer in an environment in which chemicals with a corrosive effect, explosive gases,
toxic gases, evaporation heat, high ambient temperatures or extreme dust and dirt can be found.
Pos : 12 /Beko T ec hnis che D okumentati on/Übersc hriften/1/Besti mmungsgemäße Ver wendung @ 0\mod_1183637706293_6.doc @ 5383
PNEUMATIG
