PNEUMATIG.EU - GDYNIA UL.WIELKOPOLSKA 158 -
58 622 49 22
Installation
12
DRYPOINT® RA 3-160
9
Installation
9.1
Place of installation
Note!
Ambient conditions!
In the event that the dryer is not installed under suitable ambient conditions, the ability of the device to con-
dense refrigerant gas is impaired. This can result in a higher load of the refrigerating compressor, and in a
loss of efficiency and performance of the dryer.
This in turn leads to overheated condenser fan motors, to malfunction of electric components and to a
breakdown of the dryer.
Do not install the dryer in an environment in which chemicals with a corrosive effect, explosive gases, toxic
gases, evaporation heat, high ambient temperatures or extreme dust and dirt can be found.
Minimum installation requirements
Choose an area which is clean and dry, free from dust and protected against atmospheric disturbances.
The load-bearing zone must be even, horizontal and able to bear the weight of the dryer.
Minimum ambient tempe1°C.
Maximum ambient temperature 50°C.
Leave a free area of at least one metre in all directions of the dryer. This space is necessary to facilitate maintenance
works.
The dryer does not need bottom attachment. However, in installations in which the device is suspended, an attaching
part will be required for the suspended device.
1 m
1 m
1 m
1
m
L
G
T
00
01
Dryer DRYPOINT RA 3-23, suspended:
Part. B = Teil B
PNEUMATIG
