Beko DNE 65500 DE, Manual

Page: 33 / 47

EN 11
Operating your refrigerator
The factory setup temperature during the first
operation is 4 °C for fridge compartment and -18
°C for freezer compartment.
Your refrigerator’s compressor will start running
approximately 1 minutes after the refrigerator
is plugged in for the first time. After startup of
the compressor, compartment temperatures will
reach to the setup temperatures in 24 hours
depending on the ambient temperature and load
status of your refrigerator.
When your refrigerator is in this mode, pay
attention to the following points during the first
12 hours, or 24 hours depending on the ambient
temperature.
Full protection triangle:
Hygiene: Odor filter in the air duct of the fridge
compartment helps to clean the air in the
refrigerator. This filter reduces the formation of
bad odors by means of its coating.
Silver: Inner surfaces of the refrigerator are
rendered antibacterial by means of the silver-
ion additive. Thus, growth and reproduction of
bacteria on interior body parts are prevented.
Ion: Air is ionized by means of the ionizer system
in the fridge compartment air duct. Thanks to
this system, air-borne bacteria and particles that
cause odor are removed.
Dual cooling system:
Your refrigerator is equipped with two separate
cooling system to cool the fresh food compartment
and freezer compartment. Thus, air in the fresh
food compartment and freezer compartment do
not get mixed. Thanks to these two separate
cooling systems, cooling speed is much
higher then other refrigerators. Odors in the
compartments do not get mixed. Also additional
power saving is provided since the defrosting is
performed individually.
Setting the fridge compartment
temperature
Fridge compartment temperature can be set at
one of the following temperatures:
8, 7, 6, 5, 4, 3 and 2°C. Press the button to
change. The temperature will decrease by 1°C.
Every time you press the button, the temperature
will go down and then return to the highest setting.
Release at the desired temperature and the new
set temperature will be stored.
If you think that your food is colder than you
desired, you can adjust the temperature setting of
fridge compartment to 7 or 8.
Setting the freezer compartment
temperature
Freezer temperature can be set at one of the
following temperatures : -18, -19, -20, -21, -22,
-23 and -24°C. Press the button to change. The
temperature will decrease by 1°C. Every time you
press the button, the temperature will go down and
then return to the highest setting. Release at the
desired temperature and the new set temperature
will be stored.
Freezer Compartment
Adjustment
Fridge
Compartment
Adjustment
Explanations
-18°C 4°C This is the normal recommended setting.
-20,-22 or -24°C 4°C
These settings are recommended when the ambient
temperature exceeds 30°C.
Fresh Freeze indicator
flashes
4°C
Use when you wish to freeze your food in a short
time. Your refrigerator will return to its previous mode
when the process is over.
-18°C or colder 2°C
If you think that your fridge compartment is not cold
enough because of the hot conditions or frequent
opening and closing of the door.
-18°C or colder
Quick Cool
indicator flashes
You can use it when your fridge compartment is
overloaded or if you wish to cool down your food
rapidly.