Beko DIN16210 User Manual Download

Page: 28 / 43

Dishwasher / User’s Manual

/41 EN

Operating the product

Scheduling the washing

time

Time Delay

If an economical electricity tariff is applied

in your region, you can use the Time

Delay function to wash your dishes during

appropriate hours.

You can delay the start of the selected

programme until 9 hours.

1. Press the Time Delay function key after

selecting the washing programme and

other auxiliary functions.

2. Once you press the Time Delay key "3

hours" Time Delay indicator will start

flashing.

3. Set the desired time by pressing the

Time Delay key. Each press on the key

will increase up to 9 hours with 3-hour

increments.

4. Close the door of your machine after

setting the Time Delay. Once the delay

time is over, the selected programme

will start automatically.

Warning Sound and Interior

Lighting Settings

(depends on model)

Use the submenu settings to change the

"Warning Sound" and "Interior Lighting"

settings for your product.

Changing the Warning Sound and

Interior Lighting Settings

1. After turning on the machine, press

and hold Time Delay and Programme

keys simultaneously for 3 seconds.

2. Press the programme key until the

Rinse Aid icon starts to flash. The

applicable options will be displayed on

the programme indicator as follows:

Sound On / Interior Lighting On;–[Display

P1]

Sound Off / Interior Lighting On;–[Display

P2]

Sound On / Interior Lighting Off;–[Display

P3]

Sound Off / Interior Lighting Off;-[Display

P4]

3. You can turn ON or OFF the Warning

Sound/Interior Lighting feature with

the time delay key.

4. Turn off the machine with On/Off key

to save the changes.

After the "Interior Lighting ON"

is set, the interior lighting will

switch ON for 2 minutes if the

door is opened and switched

OFF after 2 minutes.

If "Interior Lighting OFF" is set

then interior lighting will not

switch ON.

Floor illumination

Warning to show that machine is

in washing phase

(depends on the model)

Your machine reflects a light to the floor

during the washing process. This light turns

off after the washing process is complete.

Floor illumination is activated

automatically when the

washing programme starts and

remains lit until the end of the

programme.

Floor illumination cannot be

cancelled by the user.

Summary of Contents for DIN16210












































Search results

Summary of Contents for DIN16210

Reviews:

Related manuals for DIN16210

Brands by name

Popular brands

Beko DIN16210, User Manual

Search results

Summary of Contents for DIN16210

Reviews:

Related manuals for DIN16210

Brands by name

Popular brands