Beko DIN16210, User Manual

Page: 16 / 43

14
Dishwasher / User’s Manual
/41 EN
Preparation
C
Salt reservoir will fill with water
when you start the product.
Therefore, add the softening
salt before starting the
machine.
1. First take the lower basket out to add
softening salt.
2. Turn the salt reservoir lid counter
clockwise to open it (A, B).
C
Salt reservoir will fill with water
when you start the product.
Therefore, add the softening
salt before starting the
machine.
C
Before initial use, fill the water
softening system with 1 litre of
water (C).
If the hardness level of the supply water is
above 90 °dF or if you are using well water,
then it is recommended to use water
purification devices and special filters.
If the hardness level of the supply water is
below 13°dF, there is no need to use salt
in your dishwasher. If this is the case, “No
Salt Warning Indicator” (if any) illuminates
continuously on the panel of your machine.
If the water hardness level adjustment
is set to level 1, the “No salt warning
indicator” will illuminate continuously
although it is not necessary to use salt. If
you use salt under this condition, salt will
not be consumed and the Salt indicator will
not illuminate.
C
If you move your house, it is
necessary to readjust water
hardness level of your machine
by considering the information
given above according to the
hardness level of the supply
water in your new location.
Your machine will display the
most recently adjusted water
hardness level.
Adding salt
Water softening system needs to be
regenerated in order that the product
operates with the same performance
continuously. Dishwasher salt is used for
this purpose.
C
Use only special softening salts
produced particularly for the
dishwashers in your machine.
C
We recommend using granular
or powder softening salts. Do
not use salts that are insoluble
in water such as table salt or
common salt. Performance of
water softening system may
get worse in time.