background image

Dishwasher / User’s Manual

29 / 41

EN

Maintenance and cleaning

6

Service life of the product extends and 

frequently faced problems decrease if it is 

cleaned at regular intervals. 

A

Unplug the product and turn off 

the tap before attempting any 

cleaning procedures.

C

Do not use abrasive substances 

for cleaning.

C

Clean the filter and impellers 

at least once a week in order 

for the machine operates 

efficiently.

Cleaning the outer surface 

of the product

Wipe the outer surface and door gaskets 

of the product gently with a mild cleaning 

material and damp cloth. Wipe the "Control 

panel" only with a slightly damp cloth.

Cleaning the interior of the 

machine

 

Clean the interior of the machine and 

the tank by running a programme with 

or without detergent based on the 

degree of soil.

 

If water has remained in the machine, 

drain the water by performing the 

procedures under the topic "Canceling 

a programme". If the water cannot 

be discharged, remove the filters 

as specified in the "Cleaning the 

filters" section and check if there 

are any leftover deposits that have 

accumulated at the bottom of the 

machine, blocking the water path. 

Clean if necessary. 

Cleaning the filters

Clean the filters at least once a week in 

order for the machine operates efficiently. 

Check if food residues are left on the filters. 

If there are food residues on filters, take 

them out and clean well under running 

water.

1.  Turn the micro filter (1) and coarse 

filter (2) assembly counter clockwise 

and pull it out from its seating.

2.  Pull out the metal/plastic filter (3) from 

the seating.

3.  Press the two pawls on the coarse 

filter inwards and separate the coarse 

filter from the assembly.

Summary of Contents for DIN15211












































Reviews: