•
door filters in their
places by inserting
intrinsically.
Install them
VS
REMARK
• Clean the metal sensors 4 times a year.
• Do not use metal tools to clean the
metal surfaces of the sensors.
• Let the machine cool down if it is still hot
from the drying process.
• Clean the inside surface of the front door
and its seals with a soft damp cloth.
• or with the brush on the air channeling
cover
HAS
WARNING !
• Do not use metal tools to clean the
metal surfaces of the sensors.
• Never use solvents, cleaning products or
similar substances when cleaning, as
these products cause a risk of fire and
explosion!
6.3 Emptying the water tank
The moisture in the laundry is removed and
condensed during the drying process and the
water that appears accumulates in the tank.
Empty the water tank after each drying cycle.
6.2 Clean the sensor
HAS
WARNING !
• Condensed water is not drinkable!
• Never remove the water tank while a
program is running.
• Your machine is equipped with drying
sensors which detect whether the
laundry is dry or not. To clean the
sensor: Open the loading door of the
dryer.
• Let the machine cool down if drying
has just been carried out.
• Clean the metal sensors using a soft cloth
soaked in vinegar and then dry them.
6.4 Cleaning the condenser
A small amount of lint may pass through the
filter and collect on the metal surface of the
condenser.
The metal surface of the condenser should be
cleaned regularly.
If the filter icon flashes on the screen, please
inspect the metal surface of the condenser. If
it's dirty, clean it. This part should be checked
at least once every 6 months
Dryer / User Manual
21
Summary of Contents for DF8421TX0
Page 27: ......
