3 Setup
• Keep at least 1 cm away from the edges
of other furniture.
• Your dryer can be used at temperatures
b5°C and +35°C. If the
conditions of use are outside these
values, the operation of the dryer will be
impaired and it may be damaged.
• The rear surface of the dryer should be
placed against a wall.
Before calling the nearest authorized
service agent for installation of the dryer,
ensure that the electrical installation and
the drain pipe are suitable by referring to
the user manual . If not, contact a qualified
electrician and service technician to make
the necessary connections.
VS
REMARK
B
DANGER!
• The preparation of the installation of the
dryer and the electrical installations
and water drainage are the
customer's responsibility.
• Do not place the dryer on a power cord.
*Ignore the following warnings if
your product system does not
contain R290
HAS
WARNING !
DANGER!
• Before installation, visually check the
dryer for any defects.
If the dryer is damaged, you should
not install it. Damaged products may
pose risks to your safety.
• Wait 12 hours before operating
your dryer.
• The dryer contains R290 refrigerant.*
• R290 is an environmentally friendly but
flammable refrigerant.*
• Make sure the dryer's air inlet is open
and well ventilated.*
• Keep potential flame sources away from
the dryer.*
3.1 Suitable installation
location
• Install the dryer on a stable and even
surface.
• The dryer is heavy. Don't move it by
yourself.
• Use your dryer in a well-
ventilated, dust-free
environment.
• The gap between the dryer and the floor
should not be reduced by materials such
as carpets, wood and tape.
• Do not cover the air vents of the dryer.
• A lockable, sliding or hinged door must
not block the opening of the loading
door where your dryer is to be
installed.
• When the dryer is installed, it must remain
in the same place where the connections
were made. When you install the dryer,
make sure that its rear wall is not in
contact with any element (tap, socket,
etc.).
10
Dryer / User Manual
Summary of Contents for DF8421TX0
Page 27: ......