30
USA
4. Fill the salt reservoir with salt by
using the salt funnel (D). To speed up
dissolution rate of salt in water, stir it
with a spoon.
C
You can put about 4.4 Pounds
of softening salt into the salt
reservoir.
5. Replace the lid and tighten it when the
reservoir is full.
C
You need to add salt right
before starting the machine.
Thus, the overflowing
salty water will be flushed
immediately, preventing the risk
of corrosion in machine. In cases
where you would not start
washing immediately, run your
machine empty in the shortest
program.
C
Since different salt brands
in the market have different
particle sizes and since the
water hardness may vary,
dissolution of the salt in water
may take a couple of hours.
Therefore, Salt Indicator
remains on for a while after
adding salt into the machine.
10. CARE AND
MAINTENANCE
A
WARNING:
Before cleaning
or carrying out maintenance,
switch off the appliance,
disconnect the mains plug and
turn off the water tap.
A
WARNING:
Do not repair
or replace any part of the
dishwasher or attempt any
servicing unless specifically
recommended by this manual.
We recommend that the
dishwasher only be repaired by
an authorized service agent.
A
CAUTION :
To avoid the
possibility of slipping, keep the
floor around the dishwasher
clean and dry.
Keep your appliance free
from the accumulation of
combustible materials, such as
lint, rags, and chemicals.
If the dishwasher is not in use
for an extended period of time,
we recommend you check that
the baskets are empty, leave the
inside of the dishwasher clean,
the door cracked open to allow
air to circulate, turn off both the
power and water supply to the
dishwasher.
Summary of Contents for DDT38530XWS
Page 46: ......
