12. When the BEKOMAT
®
is used it must be reconnected
For further information see the enclosed installation and
operating manual for the BEKOMAT
®
12.
12.
13. Slowly open the shut-off valves upstream and
downstream of the filter or the respective system
section
9.6 Leakage test
The leakage test is a non-destructive test method and is used to prove leak tightness in vacuum and overpressure
systems. The leakage test can be carried out in different ways.
BEKO
TECHNOLOGIES GMBH does not make a
specific recommendation here. The company operating the compressed gas system is responsible for the selection
and specification of the test method to be used, which should be carried out in accordance with valid standards and
regulations (e.g. DIN EN 1779).
Installation and operation manual
CLEARPOINT
®
3
eco
coalescing filter
39 | 56
