5
3.
Make sure that sufficient room is provided
around the appliance to ensure free air
circulation.
Fit the two plastic wall spacer supplied
with the appliance rotating 1/4 turn to
the condenser at the back of the
refrigerator (see diagram).
4.
The fridge/freezer should be located on a
smooth surface. The two front feet can be
adjusted as required. To ensure that,
your appliance is standing upright adjust
the two front feet by turning clockwise or
anti-clockwise, until the product is in
firm contact with the floor. Correct
adjustment of feet avoids excessive
vibration and noise.
5.
Refer to cleaning and care section to prepare
your appliance for use.
Do not connect your appliance to the electricity
supply until all the packing and transit protectors
have been removed including polystyrene block(s)
inserted between the compressor motor and
the cabinet (see diagrams).
Do not remove the plastic drain tray fitted above
the compressor motor on models with
auto - defrost fridge.
WARNING!
CONDENSER
SPACERS
COMPRESSOR
2
20
0
1
3
6.
To take out the baskets from the freezer compartment please proceed as in item:
