EN
9
Using the water dispenser
*optional
1. Push in the lever of the
water dispenser with
your glass. if you are
using a soft plastic cup,
pushing the lever with
your hand will be easier.
2. After filing the cup up
to the level you want,
release the lever.
It is normal for the first few glasses of water
taken from the sidpenser to be warm.
It the water dispenser is not used for a long
period of time, dispose of frist few glasses of
water to obtain fresh water
Please note, how much water flows from
the dispenser depends on how far you
depress the lever. As the level of water in
your cup / glass rises, gently reduce the
amount of pressure on the lever to avoid
overflow. If you slightly press the arm, the
water will drip; this is quite normal and not
a failure.
Filling the water dispenser's tank
Water tank filling reservoir is located inside the door
rack.
1. Open the cover of the tank.
2. Fill the tank with fresh drinking water.
3. Close the cover.
1
2
Cleaning the water tank
1. Remove the water filling reservoir inside the door
rack.
2. Remove the door rack by holding from both sides.
3. Grab the water tank from both side and remove it
with an angle of 45 C.
4. Remove the cover of the water tank and clean the
tank.
Do not fill the water tank with any other
liquid except for water such as fruit juices,
carbonated beverages or alcoholic drinks
which are not suitable to use in the water
dispenser. Water dispenser will be
irreparably samaged if these kinds of
liquids are used. Warranty does not cover
such usages. Some chemical substances
and additives contained in these kinds of
drinks/liquids may damage the water
tank.
Use clean drinking water only.
Capacity of the water wank is 3 litres; do
not overfill.
Components of the water tank and water
dispenser should not be washed in diswasher.
3
4
1
2
3