Electrical data
8
BEKOMAT® 32U
6 Electrical data
Supply voltage
(see type plate)
95…240 VAC ±10% (50…60 Hz) /100…125 VDC ±10%
or
24…48 VAC ±10% (50…60 Hz) / 18…72 VDC ±10%
Power consumption
P = 0.6 ... 3 VA (W)
Recommended cable-jacket
diameter
Ø 5.0…10 mm (0.20“…0.39“)
Recommended
wire cross-section
Spring-loaded terminal
(voltage supply/relay)
0.75...1.5 mm² (AWG 16...20)
Recommended
wire cross-section
Screw terminal
(voltage supply)
0.75...2.5 mm² (AWG 14...20)
Recommended
wire cross-section
Spring-loaded terminal
(external test)
0.75...1.0 mm² (AWG 18...20)
Recommended
wire cross-section
Screw terminal
(relay/external test)
0.75...1.5 mm² (AWG 16...20)
Recommended stripping of
cable jacket
(voltage supply/relay)
~ 30 mm (~ 1.18")
Recommended stripping of
cable jacket
(external test)
~ 90 mm (~ 3.54")
Recommended length of the
wire end tube
Spring-loaded terminal
~ 8 mm (~ 0.31 inch)
Recommended length of the
wire end tube
Screw terminal
~ 6 mm (~ 0.24 inch)
Connection data of the
potential-free contact
Switch to load *)
AC: max. 250V / 1A
DC: max. 30V / 1A
Connection data of the
potential-free contact
Switch to low signal *)
min. 5 VDC / 10 mA
Connection data of the
external test contact
on the unit side 5 VDC; switching current
≥
0,5 mA
Protection class
IP 67
Overvoltage category
(IEC 61010-1)
II
VAC = V alternating current
VDC = V direct current
*)
The switching of loads means that the properties of the contact are no longer suitable
for the switching of low signals.
