Installation and Operation Manual
BEKOKAT
®
V01 / 11-043
9 / 88
1.3
General safety instructions
NOTE
Installation and operation manual
Before reading this manual, make sure that it refers to your plant
model. This document contains important information and
instructions for the safe operation of the plant. Non-compliance with
these installation and operating instructions can cause hazards for
people and the plant.
Before executing any work, all specialist technical personnel
1
must
therefore have read the installation and operating instructions.
A copy of these operating instructions must be kept near the
installation location where it is accessible all times.
In addition to the instructions in this installation and operating
manual, always comply with the relevant national and statutory
regulations for machine operation, accident prevention and safety
for the respective application. This also applies to the use of
accessories and spare parts.
DANGER
Insufficient qualification
Improper use and handling of the
BEKOKAT
®
can lead to
considerable damage to persons or property. All activities described
in these operating instructions such as operation, function tests,
installation, adjustment and maintenance work may only be carried
out by qualified specialist personnel.
This installation and operation manual of the
BEKOKAT
®
must be
carefully read and fully understood by the responsible specialist
personnel before the start of all (installation, commissioning and
maintenance) work.
1) Specialist technical personnel
Specialist technical personnel are people who, due to their professional qualification and
knowledge in the field of measuring, control and pneumatic technology, and their knowledge
of the applicable statutory regulations, guidelines and standards are in a position to
independently foresee potential dangers in relation to the use of the device and who are
qualified to perform the tasks described in this manual. Special operating conditions (e.g.
aggressive media) require additional knowledge.