background image

19/EN

3.  After the empty washing cycle, review 

the user manual and readjust the water 

hardness level so as to suit the water 

supply.

4.  Make the appropriate rinse aid settings.

Rinse aid

 The rinse aid used in dishwashers 

is a special combination that aims to 

increase drying efficiency and prevent 

water or lime stains on the washed 

items. For this reason, care must be 

paid to have rinse aid in the rinse 

aid reservoir and to use rinse aids 

produced specially for dishwashers 

only.

1.   Open the lid of the rinse aid reservoir 

with the help of the latch.

2.  Fill the reservoir until “MAX” level.

Tablet detergents

In addition to the conventional tablet 

detergents, there are also commercially 

available detergent tablets that show water 

softening salt and/or rinse aid effect.  Some 

types of these detergents contain special-

purpose components such as glass and 

stainless steel protectors.  These tablets 

show their effects up to a certain water 

hardness level (21°dH).  Water softening 

salt and rinse aid must also be used 

together with the detergent if the water 

hardness level is above the mentioned 

level.

 The best washing performance in 

dishwashers is obtained by using 

detergent, rinse aid and water 

softening salt individually.

 Observe the instructions of the 

detergent manufacturer on the package 

when using tablet detergents.

 Contact the detergent manufacturer if 

your dishes are wet and/or if you notice 

limescale spots particularly on your 

glasses after the washing programme 

is over when using a tablet detergent.

When you switch to powder 

detergent from tablet detergent:

1.  Make sure that salt and rinse aid 

reservoirs are full.

2.  Set the water hardness to the highest 

level and perform an empty run.

Summary of Contents for BDIN26430



















































Reviews: