background image

28/EN

Adjusting the height of the upper 

basket

(depends on model) 

Upper basket height adjustment 

mechanism is designed so that you can 

create wide spaces on the upper or lower 

compartment of the machine by adjusting 

the basket upwards or downwards either 

while it is empty or full. 

Thanks to this mechanism, you may use 

your basket in three different positions, 

namely lower, center or upper positions.

To lower the basket, perform the following 

while the basket is at uppermost position;

1.   Hold the wires of the upper basket and 

raise the handle of the mechanism 

upwards as shown in the figure (A).

2.  Lower the basket to the next lower 

position.

3.  Release the basket when it catches on 

to the next lower position.

Repeat the same operation if the height is 

not adequate.

1

2

3

1.   To raise the basket, hold the wires of 

the basket and pull the basket upwards 

with both hands while the basket is at 

the lowermost position (B)

2.  Release the basket when it catches on 

to the next upper position with a “Click” 

that may be heard from the right and 

left mechanisms.

Repeat the same operation if the height is 

not adequate. 

1

2

3

 The movement mechanism may not 

work properly when the upper basket is 

overloaded or when the load is 

unbalanced. And it may fall to the next 

lower position in heavier conditions.

 Ensure that the adjustment 

mechanisms on the right and left of the 

upper basket are aligned.

Summary of Contents for BDIN26430



















































Reviews: