Beko BDDN38530DD User Manual Download Page 36

Page: 36 / 44

36/EN

InnerClean

(depends on model)

This programme is recommended to be

operated on each 1-2 months for machine

cleaning and necessary hygiene. The

programme should be operated while the

machine is empty.

In order to achieve an efficient result, it is

recommended to use together with special

machine cleaning agents.

Do not use this programme to

clean dishes. As it operates in high

temperatures, it is harmful for the

dishes.

Overflowing warning

If the machine intakes too much water or

there is leakage at any of the components

then the machine will detect this and E:01

icon will flash on the Programme indicator.

As long as the overflowing continues safety

algorithm will be active and try to discharge

the water. If overflowing stops and safety

is assured, E:01 icon will disappear. If E:01

does not disappear, there is a permanent

fault. In this case the authorised service

should be contacted.

End of programme

When the programme you have

selected comes to an end, an audible

warning signal will warn you to turn off

your machine. This audible signal will

warn you with certain intervals before it

turns off.

End of Programme indicator will light up

when the washing programme is over.

1. Open the door of the machine.
2. Press On/Off key to turn off your

machine.

3. Close the tap.
4. Unplug the machine from the socket.

For energy saving, the machine is

automatically turned off following the

completion of the programme or if the

programme is not started.

Leave your dishes in the machine for

about 15 minutes to allow them cool

down after they are washed. Your

dishes will dry in a shorter time if you

leave the door of your machine ajar

during this period. This process will

increase the drying effectiveness of

your machine.

Water cut-off warning

If mains water is cut or water inlet tap is

turned off the machine cannot take water in

and E:02 icon will flash on the programme

indicator. As long as the problem continues,

washing programme is paused and the

water inlet is checked regularly by the

machine; when the water is restored E:02

icon will disappear after a while and the

washing programme resumes.

Summary of Contents for BDDN38530DD













































Search results

Summary of Contents for BDDN38530DD

Reviews:

Related manuals for BDDN38530DD

Brands by name

Popular brands

Beko BDDN38530DD, User Manual

Search results

Summary of Contents for BDDN38530DD

Reviews:

Related manuals for BDDN38530DD

Brands by name

Popular brands