Beko BDDN38530DD User Manual Download Page 33

Page: 33 / 44

33/EN

Changing Warning Sound Volume

1. After switching on your machine, press

the Menu key for 3 seconds.

In some models pressing the Menu

key only for once will allow you to enter

the Settings menu.

2. Press <- and +> keys to move to the

“S:” position on the display.

3. Each pressing on the Selection key will

change the warning sound volume as

"S:0" off, "S:1" medium and "S:2" high.

4 Switch off the machine with the On/Off

key to save the changes.

IonGuard function

(depends on the model)

IonGuard function is enabled at regular

intervals and prevents the formation of

bad odours due to putrefaction. If this

function is selected, it will be activated

while the product is turned off and the

IonGuard indicator on the panel will flash.

A ventilation noise can be heard, this

is normal. Until the function selection is

disabled, system is automatically activated

intermittently.

EverClean Filter

(depends on the model)

With this function, your micro filter will be

cleaned by a special system at the end of

washing cycle and it is made ready for use

for the next usage of the machine. This

cleaning process increases the cleaning

period of the micro filter from 2 weeks to

3 months and thus boosts the washing

performance. Employing this function in

every washing cycle is recommended in

order to get the most out of it.

SelfDry

(Depends on the Model)

Thanks to the “SelfDry” feature on your

machine, the drying effectiveness of your

machine is improved and power is saved.

There are two options, namely “OFF” and

“ON”.

You may use sub-menu settings to change

“SelfDry” settings.

When you activate this function, the door

of your machine is opened automatically at

the end of the washing cycle.

SelfDry feature opens the door at

the end of the washing cycle thanks

to the “door opening shafts". This

process takes about 2 minutes. Do not

force to close the door if the power is

interrupted while the shafts are moving

out. Operation shall be completed

and shafts shall be retracted when the

power is restored.

SelfDry function may cause changes to

the cycle time.

Summary of Contents for BDDN38530DD













































Search results

Summary of Contents for BDDN38530DD

Reviews:

Related manuals for BDDN38530DD

Brands by name

Popular brands

Beko BDDN38530DD, User Manual

Search results

Summary of Contents for BDDN38530DD

Reviews:

Related manuals for BDDN38530DD

Brands by name

Popular brands