Beko BBCW12400X, User Manual

Page: 49 / 60

EN / 49
• The lamp used in this product is not suit-
able for use in the lighting of home rooms.
The purpose of this lamp is to help the
user see food products.
• The lamps used in this product must with-
stand extreme physical conditions such as
temperatures above 50 °C.
If your oven has a round lamp,
a. Disconnect the product from the electri-
city.
b. Remove the glass cover by turning it
counter clockwise.
c. If your oven lamp is type (A) shown in the
figure below, rotate the oven lamp as
shown in the figure and replace it with a
new one. If it is type (B) model, pull it out
as shown in the figure and replace it with
a new one.
d. Refit the glass cover.
If your oven has a square lamp,
a. Disconnect the product from the electri-
city.
b. Remove the wire shelves according to
the description.
c. Lift the lamp's protective glass cover with
a screwdriver.
d. If your oven lamp is type (A) shown in the
figure below, rotate the oven lamp as
shown in the figure and replace it with a
new one. If it is type (B) model, pull it out
as shown in the figure and replace it with
a new one.
e. Refit the glass cover and wire shelves.
8 Troubleshooting
If the problem persists after following the in-
structions in this section, contact your
vendor or an Authorized Service. Never try to
repair your product yourself.
Steam is emanated while the oven is
working.
• It is normal to see vapour during opera-
tion. >>> This is not an error.
Water droplets appear while cooking
• The steam generated during cooking con-
denses when it comes into contact with
cold surfaces outside the product and
may form water droplets. >>> This is not
an error.