Beko 8690842205446, User Manual

Page: 24 / 215

24 / EN
3.2 Washing or replacing the filter
The vacuum suction head (21) on the appliance is assembled with a wash-
able permanent filter to avoid trouble in case the jug lid (3) is spattered
with food, as this can block the vacuum passage and cause trouble.
Press
Filter
Vacuum
seal
Suction
head cover
Press the latches of suction
head cover (21) at both sides
to remove it downward.
Take out the filter (19) from
the vacuum seal (20) to wash
or rinse it, or replace a new
one.
Place and secure the suc-
tion head cover (21) back be-
fore use.
The jug lid (3) is also assembled with a washable permanent filter.
Open
Open
Lock
Lock
Lo
ck
Op
en
Turn over the lid (3) and open
the backflow prevention cap
by turning it anti-clockwise to
remove it from the lid (3).
Take out the backflow pre-
vention cap to wash or rinse
then to dry it. Make sure there
is no water or foods blocked
venting holes.
Place and secure the back-
flow prevention cap back by
turning it clockwise before
use.
3
Cleaning and care