13 / 36 EN
Refrigerator / User Manual
Installation
2.
Connect the other end of the water
hose to the water pump by pushing the
hose into the pump’s hose inlet.
3.
Place and fasten the pump hose inside
the carboy.
4.
Once the connection is established,
plug in and start the water pump.
C
Please wait 2-3 minutes after
starting the pump to achieve the
desired efficiency.
C
See also the pump’s user guide for
water connection.
C
When using carboy, water filter is
not required.
3.9 Water filter
(Optional)
The product may have internal or
external filter, depending on the model.
To attach the water filter, follow the
instructions below.
3.9.1. Fixing external
filter on the wall
(Optional)
A
WARNING
:
Do not fix the filter on
the product.
Check to see the following parts are
supplied with your product’s model:
1
2
3
4
5
6
1.
Connector (1 piece): Used to attach the
water hose to the rear of the product.
2.
Tap adapter (1 piece): Used for
connection to the cold water mains.
3.
Porous filter (1 piece)
4.
Hose clip (3 pieces): Used to fix the
water hose on the wall.
5.
Filter connecting apparatus (2 pieces):
Used to fix the filter on the wall.
6.
Water filter (1 piece): Used to connect
the mains water to the product.